An immersion heater is an electric device that uses a submerged heating element to heat water in a tank or cylinder. It is electrically operated and has a thermostat to regulate the water temperature. An easy and economical way to heat water for residential or commercial use is with an Immersion Heater. But occasionally, they might cease to function for a variety of reasons. In this blog we’ll go over some of the typical reasons immersion heaters are not working along with some tips to solve that.
Reasons for the Immersion Heater Failure
Shelf Life
Most electric immersion heaters have a limited shelf life. There is almost no certainty of how long typical heaters will survive. A variety of things can influence tenure. These include environmental circumstances, humidity, temperature changes, usage frequency, maintenance efficiency, and product quality.
Damage
There may be issues with the electric heater fan that are preventing your heat source from functioning properly. After opening the casing, thoroughly check the circuits for breakage in the electrical path.
Replacements
Rather than purchasing a new heater, it is sometimes a smart idea to replace specific sections of an existing one. If you discover that the resistors or circuits are producing problems, replace the components.
Immersion Water Heater Repairs: Steps to Figure Out and Solve the Problem
Tripped circuit breakers
Consider your immersion heater to be a hard worker who is eager to heat your water before taking an unexpected rest. This break occurs frequently as a result of tripped circuit breakers. Check your electrical panel for any tripped breakers and reset them to restore power to your dependable heater.
Issues with the heating element
Consider the heating element to be the central component of your immersion heater. It might become clogged with limescale or deteriorate with time, causing the entire system to suffer. Turn off the power, check the element for symptoms of corrosion or scale development, and give it the attention it deserves.
Faulty thermostats
Consider the thermostat the conductor of your immersion water heater symphony. If it goes out of tune, you will receive either scalding hot or lukewarm water. Adjust the thermostat settings carefully, and if there is no change in water temperature, it may be time to replace this musical maestro.
Sediment accumulation
Empty the tank or cylinder and look within for any indications of sediment accumulation. Flush the tank or cylinder with vinegar or a descaling solution to dissolve and remove the sediment if there is a lot of it. The anode rod- a metal rod inside the tank or cylinder that stops corrosion also needs to be replaced. It is possible for the heating element to corrode more quickly and fail earlier if the anode rod is absent or worn out.
Problems with the wiring
Immersion heater’s wiring is similar to the intricate network of roadways in a city. If there is a traffic delay or a detour, your heater will not operate properly. Inspect the wire for apparent flaws, fraying, or loose connections. If you notice any problems, consider contacting an electrician to reroute traffic.
Final Words
A heater is a helpful appliance that can heat water. But, it occasionally may not work properly for a variety of reasons, just like any other device. Some of the most frequent issues with immersion heaters can be resolved on your own or with professional assistance by using the above troubleshooting techniques. You can once again enjoy hot water by doing this and reactivate your immersion heater. To obtain additional details about heaters and related goods please visit the website of Shiva Heaters, a prominent producer and supplier of industrial heaters.
